Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Sunheat PHSQGH
Summary of Contents for Sunheat PHSQGH
- Page 1 Model #PHSQGH / 40,000BTU...
- Page 2 WARNING This product can expose you to chemicals including carbon monoxide which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Page 4 (Top: 32 in Side: 26 in)
- Page 6 Not Included - 6 -...
- Page 7 2.Locate the propane cylinder bracket (11) and 1.Attach wheels (10) to bottom plate (1) . attach it on the bottom plate with 3 bolts and nuts provided with the bracket.Use the M8x45 screw to secure the propane cylinder. 3.Connect and fix the 4 lower support (6) to the 4.Connect 4 upper supports (5) to the lower bottom plate(1) and middle plate (3) with supports (6) with screw (19), then fix the...
- Page 8 5.Unscrew the red igniter button on the control 6.Carefully put the glass tube (7) up through the center of the hole in the upper plate (4).Make sure the rubber box and insert the AA battery (17) with the ring (18) is attached on the lower end of the glass tube. POSITIVE end facing upward.Then attach the Now place the glass tube through the hole on the middle control box (2) underneath the middle plate (3)
- Page 9 7. Attach the bolts onto the damper (4),and put 3pcs 8.Attach the protection guards (9) to the upper frame by washer onto the bolts,then put the reflector (8) inserting the hooks at the top of the guards into the holes onto the bolts,put 3pcs washer through the bolts on the supports.
- Page 10 10.Screw the handle (15) on the front panel (14) - attach the panel by inserting its two hooks into the holes on the bottom plate.Hook the chain (16) to the hole in the control box,then close the panel to the middle plate - the panel is attached by the magnets. Tips:the chain can hole the panel while operating the control.
- Page 11 3. Check f ht, pr PILOT...
- Page 13 AA battery is missing or dead Replace AA battery...
- Page 15 WARRANTY CLAIM PROCEDURE: Any product that proves to be defective within the warranty period must be delivered to the nearest SUNHEAT Warranty Service Center or to the address below. All transportation charges are the responsibility of the consumer. A copy of the original receipt must accompany all warranty claims.
Need help?
Do you have a question about the PHSQGH and is the answer not in the manual?
Questions and answers