Proseries pass through shielded rj45 modular plugs (7 pages)
Summary of Contents for Simply45 S45-1155
Page 1
Shielded RJ45 Modular Plugs (patent pending) Congratulations on purchasing the Simply45® S45-1155 Standard Series Shielded External Ground RJ45 Modular Plugs for 10G Shielded and other large diameter shielded LAN cables. Our S45-1155 plugs include the uniquely designed and patent pending Bar45™.
Page 2
Trim all cable shielding (AL foil, metal braid) back to the cable jacket. We recommend using the Simply45 5” Angled Flush Cutter (S45-801). Do not cut off the drain wire. Fold the drain wire straight back about 1inch (2.5cm) over the cable jacket.
Page 3
GR BL STEP 4 Untwist and straighten the wire conductors. We recommend using the Simply45 Adjustable LAN Cable Stripper (S45-S01BL/YL) that has a wire straightener comb on the top. Next, align the wires in the correct alignment pattern (Type A or B).
Page 4
0.2” (5mm) protruding past the front of the Bar45 load bar. STEP 8 Insert the cable with the Bar45 into the plug. The S45-1155 plug is designed to accommodate insertion of large diameter cables up to 8.0mm (0.315”). Work the cable jacket into the plug until fully inserted.
Page 5
STEP 11 Slide the S45-1155 metal shell over the plug body as shown above. Press-In on the bottom of the plug as you attach the shell. This will allow the plug to snap into the metal shell.
Need help?
Do you have a question about the S45-1155 and is the answer not in the manual?
Questions and answers