Maytag MVWC215EW1 Use And Care Manual page 9

7.
Select SOIL LEVEL
Once you select a cycle, select the desired soil level by
turning the Soil Level knob to the appropriate setting.
8.
Select WASH TEMP
Once you select a cycle, select the desired wash temperature
by turning the Wash Temperature knob to the appropriate
setting based on your load. All rinses are cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp
Hot
Some cold water is added to save
energy. This will be cooler than your
hot water heater setting.
Warm
Some cold water will be added, so
this will be cooler than what your
previous washer provided.
Cool
Warm water is added to assist in
soil removal and to help dissolve
detergents.
Cold
Warm water may be added to assist
in soil removal and to help dissolve
detergents.
Tap Cold
This is the temperature from
your faucet.
Select the desired cycle options.
Press the START/Pause button to start the wash cycle. When
the cycle has finished, the Done indicator will light. Promptly
remove garments after cycle has completed to avoid odor,
reduce wrinkling, and prevent rusting of metal hooks, zippers,
and snaps.
Unlocking the Lid to Add Garments:
Suggested Fabrics
If you need to open the lid to add 1 or 2 missed garments:
Press START/Pause. The lid will unlock once the washer
Whites and pastels
movement has stopped. This may take several minutes if the
Durable garments
load was spinning at high speed. Add garments, close lid, and
press START/Pause again to restart the cycle.
Heavy soils
If lid is left open for more than 10 minutes, the water will pump
out automatically.
Bright colors
Moderate to light
soils
Colors that bleed
or fade
Light soils
Dark colors that
bleed or fade
Light soils
Dark colors that
bleed or fade
Light soils
9.
Select cycle options (on some
models)
10.
Press START/Pause to begin
wash cycle
9