Leviton 47611-GT4 User Manual page 78

Internet Gateway User Guide
Data - Routing Screen
RIP
Enable RIP Check this to enable the RIP (Routing Information Protocol) feature
of the Internet Gateway..
The Internet Gateway supports RIP 1 only.
Static Routing
Static Routing This list shows all entries in the Routing Table.
Table Entries
•
•
•
Properties
•
•
•
Figure 45: Routing Screen
The "Properties" area shows details of the selected item in the
list.
Change any the properties as required, then click the "Update"
button to save the changes to the selected entry.
Destination Network - The network address of the remote LAN
segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last)
field can be left at 0.
Network Mask - The Network Mask for the remote LAN
segment. For class "C" networks, the default mask is
255.255.255.0
Gateway IP Address - The IP Address of the Gateway or
Router which the Internet Gateway must use to communicate
with the destination above. (NOT the router attached to the re-
mote segment).
Metric - The number of "hops" (routers) to pass through to
reach the remote LAN segment. The shortest path will be used.
The default value is 1.
74