Lan Screen - Leviton 47611-GT4 User Manual

LAN Screen

Use the LAN link on the main menu to reach the LAN screen. An example screen is shown
below.
Data - LAN Screen
TCP/IP
IP Address IP address for the Internet Gateway, as seen from the local LAN. Use
the default value unless the address is already in use or your LAN is
using a different IP address range. In the latter case, enter an unused IP
Address from within the range used by your LAN.
The default value 255.255.255.0 is standard for small (class "C")
Subnet Mask
networks. For other networks, use the Subnet Mask for the LAN
segment to which the Internet Gateway is attached (the same value as
the PCs on that LAN segment).
•
DHCP Server
•
•
See the following section for further details on using DHCP.
Buttons
Save Save the data on screen.
Cancel The "Cancel" button will discard any data you have entered and reload
the file from the Internet Gateway.
Figure 6: LAN Screen
If Enabled, the Internet Gateway will allocate IP Addresses to PCs
(DHCP clients) on your LAN when they start up. The default (and
recommended) value is Enabled.
If you are already using a DHCP Server, this setting must be
Disabled, and the existing DHCP server must be re-configured to
treat the Internet Gateway as the default Gateway. See the follow-
ing section for further details.
The Start IP Address and Finish IP Address fields set the values
used by the DHCP server when allocating IP Addresses to DHCP
clients. This range also determines the number of DHCP clients
supported.
Setup
15