Change Password - LevelOne WBR-6800 User Manual

WDS (Wireless Distribution System)
WDS operation as defined by the IEEE802.11 standard has been made available. Using WDS it is
possible to wirelessly connect Access Points, and in doing so extend a wired infrastructure to
locations where cabling is not possible or inefficient to implement.
For maximum compatibility, it is recommended that WDS be set up using only the same models, in
this case, WBR-6800. Also note that the standard only supports WEP encryption.
Select the AP Mode that most suites your desired application.
WDS - Bridge:
Create a WDS Bridge between multiple Access Points, and bridge to only wired connections.
In this mode, the WBR-6800 will not provide service to any wireless clients.
Click Save to save the settings and Undo to cancel

Change Password

This page allows you to change the WBR-6800 Web Configuration password. Please type in the old
password (factory default password is password) and then type in the new password.
If you change the password, make sure you use the new password next time you log into the web
configuration.
Click Save to save the settings and Undo to cancel.
32