Appendix; Troubleshooting; Reset And Restore - LevelOne FCS-5030 User Manual

Appendix

A. Troubleshooting

Reset and restore

Reset Button
There is a button in the cable of the Network Camera. It is used to reset the system or restore
the factory default settings. Sometimes resetting the system sets the system back to normal
state. If the system problems remain after reset, restore the factory settings and install again.
RESET: Click on the button.
RESTORE: Press on the reset button continuously for 30 seconds.
Restoring the factory defaults will erase any previous settings. Reset or
restore the system after power on.