Software Revision Upgrade - LevelOne FCS-5030 User Manual

Software revision upgrade

Customers can obtain the up-to-date software from the web site of LevelOne. An easy-to-use
Upgrade Wizard is provided to upgrade the Network Camera with just a few clicks. The upgrade
function is opened to the Administrator only. To upgrade the system, follow the procedures below.
1. Download the firmware file named "xxx.pkg" from the appropriate product folder.
2. Run the Installation Wizard and proceed following the prompts. Refer to the instructions of the
Installation Wizard on CD-ROM for details.
3. Or upgrade firmware from HTTP web page directly.
4. The whole process will finish in a few minutes and it will automatically restart the system.
If power fails during the writing process of Flash memory, the program in the
memory of the Network Camera may be destroyed permanently. If the Network
Camera cannot restart properly, ask your dealer for technical service.