Advertisement
Connections and installation
(Continued)
Connecting video equipment
Check that the power for the projector and computer is off before
connecting the cables.
Audio cable (not supplied)
To audio output R
(red)
To audio output L
(white)
To RGB
To RGB
INPUT
INPUT
(AUDIO)
(RGB)
RS-232C
RGB
AUDIO
RGB
AUDIO
CONTROL
MONITOR OUTPUT
RGB INPUT
To VIDEO INPUT (VIDEO) (yellow)
VIDEO INPUT
S-VIDEO
VIDEO
L - AUDIO -R
To VIDEO INPUT (AUDIO L) (white)
To VIDEO
To VIDEO INPUT (AUDIO R) (red)
INPUT
(S-VIDEO)
Audio/Video cable (supplied)
S-VIDEO cable (not supplied)
To S-VIDEO output
Note
Signal input to the S-VIDEO jack takes priority over that to the VIDEO
jack.
(not supplied)
To C R (P R ) output
To C B (P B ) output
To Y output
Video player with color difference output
To Video output (yellow)
To Audio output (white)
To Audio output (red)
Video tape player
Output terminals
Check that the power for the projector and computer is off before
connecting the cables.
RS-232C
CONTROL
You can connect a computer
49
to control the projector.
Audio cable
(not supplied)
Connect a stereo system
for dynamic sound.
Notes
• Sound of the source which you select is output to the connected
stereo system, etc.
• The MONITOR OUTPUT connector always sends out a signal which
is input to the RGB INPUT connector regardless of your source
selection.
• Even while the projector is in standby mode, the MONITOR OUTPUT
connector continues its output.
CONTENTS
RGB
AUDIO
RGB
AUDIO
MONITOR OUTPUT
RGB INPUT
VIDEO INPUT
S-VIDEO
VIDEO
L - AUDIO -R
You can connect an
extra monitor to view
the picture.
To MONITOR OUTPUT (AUDIO)
Ø3.5mm STEREO mini plug
(Audio output level is constant.)
To audio input
17
Advertisement
