Chapter 4. Optical 3-Button Travel Wheel Mouse With 800 Dpi For Ps/2 And Usb; Product Description; Installing The Mouse Suite Software; Installing The Mouse - Lenovo USB Laser Mouse User Manual

Chapter 4. Optical 3-Button Travel Wheel Mouse with 800 DPI
for PS/2 and USB
This guide contains installation, usage, and maintenance information for the Optical 3-Button Travel
Wheel Mouse with 800 DPI for PS/2 and USB.

Product Description

Optical 3-Button Travel Wheel Mouse with 800 DPI for PS/2 and USB includes a ScrollWheel to control
scrolling and other functions. The mouse includes a PS/2 and USB connector and can be connected to
any enabled USB port.
The mouse works with computers that use the following operating systems:
®
v Microsoft Windows
v Microsoft Windows XP
v Microsoft Windows Vista
v Operating systems that support USB connectivity
v PS/2 ports on computers using the Microsoft Windows NT
This package contains:
v One Optical 3-Button Travel Wheel Mouse with 800 DPI for PS/2 and USB.
v One CD-ROM containing installation software and an online User's Manual
v One USB to PS/2 adapter

Installing the Mouse Suite Software

Included in your package is a CD-ROM containing installation software for the mouse. To install the
Mouse Suite Software.
1. Turn on the computer and start the operating system.
2. Insert the Device Driver CD into your CD-ROM drive. Click the Driver arrow. Follow the on-screen
instructions on your screen. If the set-up program does not open, go to steps 3-6. If the setup program
opens, go to step 6.
3. Click Start.
4. Click Run.
5. In the command line, type X:/setup where X is the drive letter for your CD-ROM drive.
6. Click OK.
7. Follow the on-screen instructions to complete the Mouse Suite Software installation.
Note: When you are prompted, click PS/2 if you will be connecting the mouse to the standard mouse
connector or click USB if you will be using the mouse with a USB connector.
The Mouse Suite Software installation is complete. See "Installing the Mouse".

Installing the Mouse

This section contains information for installing the mouse in PS/2 mode and in USB mode.
If a PS/2 mouse is plugged into your computer, you must first turn off your computer prior to removing
this mouse. Plug in your mouse and restart your computer. If message displays indicating that you do
not have a PS/2 mouse connected, ignore the message and continue.
© Lenovo 2005, 2007. Portions © IBM Corp. 2005.
®
2000 Professional
™
®
Workstation operating system.
4-1