Summary of Contents for Excelitas Technologies OmniCure V3
Page 1
OmniCure V3 LED Head Assembly Guide & Specifications UV LED Head for OmniCure LX500/LX505 Excelitas Canada Inc. 2260 Argentia Road Mississauga (ON) L5N 6H7 Canada +1 905.821.2600 www.excelitas.com 035-00730R Rev 1...
Page 2
User Guide Excelitas Canada Inc. 2022 All rights reserved OmniCure, and StepCure, are trademarks or registered trademarks of Excelitas Canada Inc. All other product and company names are trademarks or registered trademarks of their respective holders. Any product or software photos shown are for reference only and are subject to change without notice. Printed in Canada.
1. Safety 1.1 Glossary of Symbols Caution risk of danger – consult accompanying documents Hazardous optical radiation/ UV emitted from this product. Use appropriate shielding. RISK GROUP 3 Caution Label: IEC 62471-2: 2009 Caution, Hot Surface Notice: UV radiation emitted from this product/ Hot Surface (Located on 365/385 nm LED head assemblies) Caution: Possibly hazardous optical radiation emitted from this product/Hot Surface (Located on 400 nm LED head assembly)
Page 5
1.2 Safety Precautions CAUTION The LED's Heads provide optical output power classified as RISK GROUP 3 as per IEC/EN 62471-2. The user related risk of this system is dependant on the final installation and use of this product as detailed within this manual. Always follow the installation guidelines as detailed in the LX500 User Guide, 035-00628R.
Table 1 LED Heads Components Number Table Part Number Description 019-00398R LX500 365nm x 55mm UV HEAD HDMI V3 019-00399R LX500 365nm x 125mm UV HEAD HDMI V3 019-00400R LX500 385nm x 55mm UV HEAD HDMI V3 019-00401R LX500 385nm x 125mm UV HEAD HDMI V3 019-00402R LX500 395nm x 55mm UV HEAD HDMI V3 019-00403R...
Table 3 Compatible Controller Part Numbers Number of V3 Part Number Description Firware Version Compatibility Heads Supported 010-00520R LX500-2 V2 1.0.7 (or Higher) Up to 2 010-00521R LX500-4 V2 1.0.7 (or Higher) Up to 4 010-00522R LX505-2 V2 1.0.7 (or Higher) Up to 2 010-00523R LX505-4 V2...
5. Technical Specifications 5.1 Optical Output 365±5nm Wavelength V3 LED Head Power (typical) 750 mW Peak Irradiance 16.8 (maximum) W/cm² W/cm² W/cm² W/cm² W/cm² Optimized Working 7.5±1mm 11.5±1mm 14±1mm 16.5±1mm 16.5±1mm Distance Spot Diameter 10mm 12mm Maximum Peak Irradiance shown. A difference of up to 20% between different LED heads may be possible. Maximum measured irradiance is directly proportional to the setup accuracy during the calibration process.
Page 9
385±5nm Wavelength V3 LED Head Power (typical) 1100 mW Peak 27.3 11.4 Irradiance W/cm² W/cm² W/cm² W/cm² W/cm² (maximum) Optimized Working 7.5±1mm 11.5±1mm 14±1mm 16.5±1mm 16.5±1mm Distance Spot Diameter 10mm 12mm Maximum Peak Irradiance shown. A difference of up to 20% between different LED heads may be possible. Maximum measured irradiance is directly proportional to the setup accuracy during the calibration process.
Page 10
395±5nm Wavelength V3 LED Head Power 1100 mW (typical) Peak 27.0 10.7 Irradiance W/cm² W/cm² W/cm² W/cm² W/cm² (maximum) Optimized Working 7.5±1mm 11.5±1mm 14±1mm 16.5±1mm 16.5±1mm Distance Spot Diameter 10mm 12mm Maximum Peak Irradiance shown. A difference of up to 20% between different LED heads may be possible. Maximum measured irradiance is directly proportional to the setup accuracy during the calibration process.
Page 11
405±5nm Wavelength V3 LED Head Power 1000 mW (typical) Peak 23.8 Irradiance W/cm² W/cm² W/cm² W/cm² W/cm² (maximum) Optimized Working 7.5±1mm 11.5±1mm 14±1mm 16.5±1mm 16.5±1mm Distance Spot Diameter 10mm 12mm Maximum Peak Irradiance shown. A difference of up to 20% between different LED heads may be possible. Maximum measured irradiance is directly proportional to the setup accuracy during the calibration process.
In the event of a claim under this warranty, the equipment is to be sent postage and carriage paid to the Excelitas Technologies Service Centre. Returned equipment will not be received without a Return Authorization (RA) Number, issued by the appropriate Service Centre.
Page 14
In the case of damage caused by wear and tear, careless handling, neglect, by the use of force or in the case of interventions and repairs not carried out by a Excelitas Technologies Authorized Service Center, the warranty ceases to be valid. This warranty may not form the basis for any claims for damages, in particular not for compensation of consequential damages.
Need help?
Do you have a question about the OmniCure V3 and is the answer not in the manual?
Questions and answers