Error Message - Contec 08A User Manual

Error Message

Error message will be displayed in the screen if there is something wrong when measuring. The causes and
solutions are shown as follows:
Error Message
Self-test failure
System failure
Loose cuff
Air leakage
Air pressure error
The pulse signal is too weak
Weak signal
overpressure Cuff is blocked or squeezed
The signal extent is too big
Excessive movement
owing to the arm or body
Over range
moving or other reasons when
Saturated signal
Time out It takes too much time
All manuals and user guides at all-guides.com
Causes
Function abnormal
Cuff is not connected
correctly.
Cuff plug fall off
Air pressure error
or the cuff is loose.
measuring
16
Solutions
Please contact us
Correctly connect cuff (refer to 8 page)
Make sure the cuff plug is securely
inserted in the windpipe (refer to 8 page)
Keep arm, body still, measure again
Correctly connect cuff (refer to 8 page)
Correctly connect cuff (refer to 8 page)
Keep arm, body still, measure again