1. The unit is shipped from the factory with the color selector jumper set to "RED" (see figure 2 - jumper is placed
across pins 2&3) and use the red diffuser.
2. To change the color to "GREEN", move the color selector jumper to "GREEN" (see figure I -jumper is placed
across pins 1&2) and use the green diffuser.
CCRGRC, CCRGRCB
Operation
WIRING DIAGRAMS
RECYCLING INFORMATION
All steel, aluminum and thermoplastic
parts are recyclable.
All cartons contain recycled materials.
Please recycle responsibly.
currentlighting.com/dual-lite
© 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
CCRG, CCRGB
COMP0003
Page 2 of 2
Rev 06/07/22
com_cc_instsht_R01