Advertisement
1. The unit is shipped from the factory with the color selector jumper set to "RED" (see figure 2 - jumper is placed
across pins 2&3) and use the red diffuser.
2. To change the color to "GREEN", move the color selector jumper to "GREEN" (see figure I -jumper is placed
across pins 1&2) and use the green diffuser.
CERG, CERGB
Operation
WIRING DIAGRAMS
RECYCLING INFORMATION
All steel, aluminum and thermoplastic
parts are recyclable.
All cartons contain recycled materials.
Please recycle responsibly.
COM604030_INST_SHT
currentlighting.com/dual-lite
© 2022 HLI Solutions, Inc. All rights reserved. Information and specifications subject to change
without notice. All values are design or typical values when measured under laboratory conditions.
CARG, CARGB
com_cerceg_instsht_R01
Page 2 of 2
Rev 06/07/22
Advertisement
