Advertisement
Quick Links
V-SERIES-AL INSTRUCTION MANUAL
Assembly & Instruction Manual
Burco® Aluminum V-Series Windshield Carrier
V-Series Model and Specifications:
V-101524B-AL-2: (15" & 24" Mast Height), (10-Lite Capacity)
*V-101524B-AL-2 Pictured
Technical assembly required. Save instructions for future reference
or leave with final assembled rack.
Visit us online at www.burcoinc.com
Burco, Inc. 2936 South Wilson Court NW
Grand Rapids, MI 49534 800-253-2593
©2022 Burco, Inc.
Page 1 of 7
©202uco, Inc.
Advertisement
Related Manuals for Burco REDIRACKS V Series
Summary of Contents for Burco REDIRACKS V Series
- Page 1 *V-101524B-AL-2 Pictured Technical assembly required. Save instructions for future reference or leave with final assembled rack. Visit us online at www.burcoinc.com Burco, Inc. 2936 South Wilson Court NW Grand Rapids, MI 49534 800-253-2593 ©2022 Burco, Inc. Page 1 of 7...
- Page 2 V-SERIES-AL INSTRUCTION MANUAL TABLE OF CONTENTS Cover Table of Contents & Tools Required Inside This Package Assembly Instructions (steps 1-2) Assembly Instructions (steps 3-4) Assembly Instructions (step 5) Replacement Parts TOOLS REQUIRED 3/16” Hex Wrench 9/16” Box End Wrench Tape Measure Cordless Drill Letter “X”...
- Page 3 Hardware- End Piece: (+ 4 self tap screws) 5/16” x 3/4” Button Head bolts 5/16” Lock Washers 5/16” Flat Washers Hardware- Mounting: 3/8” x 1-3/4“ Bolts 3/8” Lock Washers 3/8“ Nut 3/8” Flat Washers Page 3 of 7 ©2022 Burco, Inc.
- Page 4 5/16” flat washers HAND TIGHT for now. Step 2: (A) Put short end bracket into place and fasten with (4 sets) of 5/16” x 3/4” button head bolts and 5/16” lock washers. Fasten HAND TIGHT for now. Page 4 of 7 ©2022 Burco, Inc.
- Page 5 REAR OF VEHICLE Step 4: (A) The position for optimal placement of your Burco® V-rack is shown above. The rack performs best mounted offset from the center of the vehicle. The shorter base section of the rack should be positioned toward the vehicle’s center line. This positioning utilizes the taller roof and will allow the rack to accommodate larger windshields.
- Page 6 (6 sets) of 3/8 x 1-3/4” bolts and 3/8” flat washers into each of the six holes. (D) From underneath the vehicle, securely tighten (6 sets) of 3/8” nuts, 3/8” lock washers, and 3/8” flat washers. Page 6 of 7 ©2022 Burco, Inc.
- Page 7 FPVC Mast Tuff Tubing 24" All Models RBR-V101524B-AL-2 10-Lite Bottom Rubber Strip for B-101524B-AL-2 All Models The Burco® Finger Lock™ design is exclusive and proprietary to Burco, Inc.® For use with Burco Redi Racks ONLY Page 7 of 7 ©2022 Burco, Inc.