Appearance - TP-Link Deco X50-PoE User Manual

Appearance

Each Deco has an LED that changes color according to its status, one Gigabit PoE port, an advanced 2.5 Gbps PoE port, a power slot, and a reset
button.
See the explanation below:
Tip: The product label can be found at the bottom of the product.
Pulse Yellow:
Deco is resetting.
Solid Yellow:
Deco is starting up.
Pulse Blue:
Deco is ready for setup.
Solid Blue:
Deco is setting up.
Pulse Green:
Deco is upgrading firmware.
Solid Green:
Deco is all set up and connected.
Pulse Red:
The satellite Deco is disconnected
from the main Deco.
Solid Red:
Deco has an issue.
Bracket
Power Slot
2.5 Gbps PoE port
1 Gbps PoE port
Reset Button
Power Supply:
Deco can be powered via a power adapter
or a PSE device (such as a PoE switch).
Multi-Gig Internet Connection:
1× 2.5 Gbps port and 1× Gigabit port
make full use of gigabit speeds from
your local ISP. WAN/LAN support meets
all your internet demands.
Reset:
Press for 1 second and release to reset
Deco to factory default settings. The light
changing from pulsing yellow to solid
yellow indicates a successful reset.
Mounting Options
Ceiling Mount Wall Mount Tabletop
2