Option 3: In a Ceiling Tile
The Deco can be installed in a ceiling tile with the screws in the
package. Make sure the ceiling tile is larger than the Deco.
Washers *4
Pan-head Screws *4
Drill Hole for Ethernet Cable
Wing Nuts *4
1.
Remove the ceiling tile.
2.
X4
Place the mounting bracket in the
center of the ceiling tile. Mark four
positions for the screw holes and
a location for the Ethernet cable
hole.
Drill four 4 mm (5/32 in) diameter
holes for the screws and a 25
mm (63/64 in) diameter hole for
the Ethernet cable at the marked
positions.
3.
Secure the mounting bracket to
the ceiling tile using four pan-head
screws, washers, and wing nuts.
4.
Feed the Ethernet cable through
the hole and set the ceiling tile
back into place.
5.
Orient the Deco LED according to
the image, attach the Deco to the
mounting bracket, then rotate it
clockwise until it locks into place.
10