ABB HT564332 Operation Manual page 96

CAUTION
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Installing cartridge group
Remove the cover from the oil connection.

Fasten separate lifting gear to each of the two ribs on the bearing cas-

ing provided for this purpose.
Remove supports (90450) and carefully insert cartridge group.

If the rotor blades have insufficient or no clearance, the blades and cas-
ing could be damaged.
Turn rotor to check that blades do not rub against turbine diffuser.

Uniformly tighten the three screws (61059) with Verbus Ripp® wash-

ers (61058).
Remove the lifting gear.

Screw in the speed sensor (86505) along with the O-ring (86506) and

plug in the cable connector (86515).
Operation Manual / TPL67-C.. - TPL71-C..
8
8.7 Page 94