Table of Contents
Advertisement
© Copyright 2016 ABB. All rights reserved.
Disassembly and assembly
Removing cartridge group
Remove three studs (72029) at top.
Attach lifting device (90190) to compressor casing (72000), then fas-
ten and secure it to crane using lifting gear.
Loosen and remove the nuts (61037).
Uniformly press off compressor casing (72000) using three press-off
nuts (61090) fitted on bearing casing side.
Slightly lift compressor casing (72000) and withdraw it.
Remove the O-ring (42012).
Operation Manual / TPL67-C.. - TPL71-C..
8
8.5
Page 87
Advertisement
Table of Contents
