Table of Contents
Advertisement
Care and maintenance of the Soundbar
70 | Sennheiser AMBEO Soundbar System SB02
3. Press the Setup button for 5 seconds.
The update starts and the LED status bar pulses yellow.
The Soundbar restarts several times during the update. The pro-
cess can take up to 8 minutes.
Resetting the Soundbar
▷
Switch the Soundbar on.
If you want to reset the Soundbar, you have the following options:
• Reset of all Soundbar settings to the factory default settings
• Reset of all network connections
• Reset of all room calibration data
Resetting the Soundbar to the factory default settings
If you reset the Soundbar to factory default settings, the network set-
tings and the room calibration data will also be reset.
To reset the Soundbar to the factory default settings without the
Sennheiser Smart Control app:
▷
Insert e.g. a paper clip into the
Soundbar and press the paper clip for 2 seconds.
To reset the Soundbar to the factory default settings via the Sennhe-
iser Smart Control app:
▷
Tap the
System
button in the
app.
A drop-down list appears.
▷
Select
Reset
from the drop-down list.
▷
In the
Reset all settings
During the reset, the LED status bar displays a red and white
sequence.
3
1
2
Hold
5s
RESET
recess on the rear of the
Settings
menu of the Smart Control
area, tap the
Reset
2
1
button.
Advertisement
Table of Contents
