Lenovo ThinkPad Edge E425 1198 User Manual page 122

Table 5. Security menu items (continued)
Menu item
Startup menu items
Table 6. Startup menu items
Menu item
Boot
Network Boot
UEFI/Legacy Boot
UEFI/Legacy Boot Priority
Boot Mode
104
User Guide
Submenu item
Selection
• Both
• UEFI Only
• Legacy Only
• UEFI First
• Legacy First
• Quick
• Diagnostics
Selection
• Permanently Disabled
Comments
Refer to "Startup menu" on page 98.
Refer to "Startup menu" on page 98.
Enables the UEFI/Legacy boot.
Selects priority of boot option
between UEFI and Legacy.
Screen during POST:
• Quick: The ThinkPad Logo screen
is displayed.
• Diagnostics: Test messages are
displayed.
Beep at POST completion:
• Quick: No. Sounds on error cases
only.
• Diagnostics: Yes. Always sounds.
"Ctrl-S" prompt for on-board
Ethernet:
• Quick: No.
• Diagnostics: Yes.
Memory testing during POST:
• Quick: Quick test (or no test).
• Diagnostics: Full test.
Testing other devices during POST:
• Quick: Minimum test (or no test).
• Diagnostics: Can perform
necessary testing for critical
devices.
Comments
optional monitoring service
from Absolute Software.
Note: If you set the
Computrace module
activation to "Permanently
Disabled," you will be
unable to enable this
setting again.