Lenovo ThinkPad Edge E425 1198 User Manual page 101

7. With the notched end of the memory module toward the contact edge side of the socket, insert the
memory module 1
Note: If you install a memory module in only one of the two memory slots, install it in the bottom slot.
8. Pivot the memory module downward until it snaps into place.
9. Make sure that the memory module is firmly seated in the slot and cannot be moved easily.
10. Reinstall the computer cover
11. Reinstall the battery. For more information about how to reinstall the battery, refer to "Replacing the
battery" on page 69.
12. Turn the computer over again and reconnect the cables.
into the socket at an angle of about 20 degrees; then press it in firmly
1 . Then tighten the screws 2 .
Chapter 6
2 .
83
.
Replacing devices