Advertisement
Quick Links
Operation Manual
Waste Water Pump
51537–51541
Similar to image, may vary depending on model
Read and follow the operating instructions and safety information before use.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ slightly.
Advertisement
Related Manuals for XPOtool 51537
Summary of Contents for XPOtool 51537
- Page 1 Operation Manual Waste Water Pump 51537–51541 Similar to image, may vary depending on model Read and follow the operating instructions and safety information before use. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ slightly.
- Page 2 To allow for a smooth execution of your complaint or return, it is important to contact our customer service team before returning the goods. Returns Department WilTec Wildanger Technik GmbH Königsbenden 28 52249 Eschweiler E-mail: service@wiltec.info Tel: +49 2403 55592–0 Fax: +49 2403 55592–15 https://www.XPOtool.com Item 51537–51541 Page 2 The Tool Experts 08 2022-1...
- Page 3 Use cables with a sufficient size to minimise a voltage drop to the motor. • Do not touch a running motor. Modern motors can reach very high temperatures when running. https://www.XPOtool.com Item 51537–51541 Page 3 The Tool Experts 08 2022-1...
- Page 4 If the main cable or the socket has been damaged due to external influences, repairs on the cable are prohibited. Repair-work may only be carried out by a qualified technician. https://www.XPOtool.com Item 51537–51541 Page 4 The Tool Experts 08 2022-1...
- Page 5 2. Remove the suction cage from the pump casing. 3. Clean the drive wheel with clear water. Important! The pump must not be placed on the drive wheel. 4. Build the pump back together in the reversed order. https://www.XPOtool.com Item 51537–51541 Page 5 The Tool Experts 08 2022-1...
- Page 6 The cover can then be pushed away downward. We recommend tilting the pump sideways to more easily remove the cover. https://www.XPOtool.com Item 51537–51541 Page 6 The Tool Experts 08 2022-1...
- Page 7 With this assembly, the switch-on point is at 40 mm water level/60 mm depending on the pump adjust- ment. See the following table. Item number Switch-on point (㎜) 51537 51538 51539 51540 51541 https://www.XPOtool.com Item 51537–51541 Page 7 The Tool Experts 08 2022-1...
-
Page 8: Troubleshooting
Pull power plug, clean pump and short running period to waste water. shaft. Water too hot, thermal switch Ensure that the maximal water stops pump temperature does not exceed 35 ℃. https://www.XPOtool.com Item 51537–51541 Page 8 The Tool Experts 08 2022-1... - Page 9 12500 8000 13000 Max. delivery head (m) Max. immersion depth (m) Max. water temperature (℃) Hose connections (㎝) 2.54 (1″), 3.17 (1¼″), 3.81 (1½″) Max. ⌀ of foreign bodies (㎜) https://www.XPOtool.com Item 51537–51541 Page 9 The Tool Experts 08 2022-1...
- Page 10 Important note: The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instruction manual requires the written permission of the WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 51537–51541 Page 10 The Tool Experts 08 2022-1...