High performance cordless handheld vacuum cleaner (10 pages)
Summary of Contents for EdenPURE Bio SpeedCLEAN XL200
Page 1
Bio SpeedCLEAN Bio SpeedCLEAN XL200 Model No. A5970 Model No. A5970 Owner’s Manual Owner’s Manual PLEASE READ PLEASE READ AND SAVE THESE SAVE THESE INSTRUCTIONS INSTRUCTIONS...
Page 2
Do not place the battery pack near high temperatures. Do not disassemble the battery pack. If this vacuum is not working properly, contact custserv@edenpure. com. Do not try to repair the unit yourself. Do not let children play with or use this machine or the battery pack.
Page 3
DUST CUP RELEASE BUTTON DUST CUP ASSEMBLY DUST CUP ASSEMBLY RELEASE BUTTON BATTERY RELEASE BUTTON UNIT VACUUM TUBE RELEASE BUTTON MOTORIZED FLOOR BRUSH UV LIGHT...
Page 4
DUST CUP DUST CUP DUST CUP ASSEMBLY RELEASE RELEASE BUTTON BUTTON ON/OFF BUTTON SPEED CONTROL BUTTON BATTERY RELEASE BUTTON BATTERY UNIT CHARGING CHARGING NEEDLE PORT INDICATOR LIGHTS 2-IN-1 UPHOLSTERY BRUSH CHARGING CORD PET BRUSH LONG CREVICE TOOL...
PARTS ASSEMBLY Battery Unit Insert the battery unit into the bottom of the motor. When it is locked into the motor, you will hear it click. Dust Cup Insert the lower plastic clip into the hole on the motor. Th en snap the upper cover with the upper release button on the motor.
Page 6
Connection of the Motor and the Vacuum Tube Insert the upper end of the Vacuum Tube in to the main hole of the Motor below the Dust Cup until you hear it click in and lock into place.
Page 7
Connection of accessory pieces to the Motor Insert the accessory brushes into the main hole of the motor below the Dust Cup until you hear them click in and lock into place.
Connection of the Vacuum Tube with the accessory pieces Insert the accessory brushes into the bottom of the Vacuum Tube until you hear them click and lock into place. WALL MOUNT Attach wall mount to a wall using the screws and anchors that are included.
USES Low Speed, High Speed, Off Press the Speed Control Button once to turn the unit on. Press it again to turn the unit off. Use the Speed Control Button on the side of the unit to switch the speed between low and high. Use of 2-in-1 Upholstery Brush 1.
CLEANING THE UNIT Clean Dust Cup after each use Press the upper button on the Motor to release the Dust Cup Assembly Unit, then press the lower button to release the Dust Cup Lower Cover. Dust Cup Filter Cleaning A. Press the button at the bottom of the Dust Cup to release the Lower Cover of the Dust Cup to empty it into the trash.