Table of Contents
Advertisement
MODEL 610
Plug the 9 Volt AC Transformer into proper AC outlet. It is imperative, for safe and stable
operation, that the controller be connected to a properly grounded AC outlet. Unfortunately,
some of the three (3) prong outlets are not properly grounded. Check to make sure that the
outlet to be used is connected to a known ground BEFORE plugging in the AC power cord.
9 Volt
Transformer
(B)
9 Volts AC
Plug the Probe (A) into the Controller (as shown above).
Plug the 9 Volt AC Transformer connector (B) into the Controller (as shown above).
The Power LED will light.
Model 610
CONNECT PROBE AND TRANSFORMER
TO CONTROLLER
Proper AC Outlet
Low Sensor Probe
WARNING
Do Not allow this controller to come in contact
with Liquid Nitrogen vapors
Horn
9 Volt
Transmittor
Connector (B)
(A)
5
Advertisement
Table of Contents
