Haier MRV III-RC Service Manual page 112

1
The cover of electrical
appliance box
Install the lifting tools on the lifting bolts according to the instruction of the Fig.2
Be sure to follow the stipulations on products locally purchased to use nuts (M8 or M10 of 3 pieces for 4 positions)
and gaskets (M8 with the outer diameter of 24~28 mm and M10 with that of 30~34 mm of 2 pieces for 4 positions)
on the upper and lower sides of the lifting tools.
Note
Be sure that the product must be installed with the top surface (the oblique surface in the Fig.2) upward, or it will
not work well and increase the working noise.
3 5
3 5
2
2
1
Gasket (purchased locally)
Lifting tool
10-15mm
Double nuts (purchased locally)
Lifting bolt (purchased locally)
Rotate 180°
Top board
3 5
3 5
6
E l e c t r i c a l
appliance box
Electrical appliance removal
Fig.1
Nut (purchased locally)
Valve box
108
7
7
6