Mounting The Filter Frame; Care, Maintenance And Repair - Cameo STUDIO PAR TW User Manual

MOUNTING THE FILTER FRAME

To mount the filter frame (or the optionally available barndoor), first move the spring-loaded fuse
holder on the top of the spotlight to the right to unlock it, and then flip it up (Figure A). Insert the
filter frame (or the optionally available barndoor) into the grooves of the lateral and bottom holders
from above.
A
Now fold the spring-loaded fuse holder on the top of the spotlight down again, making sure that it
engages properly.

CARE, MAINTENANCE AND REPAIR

In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned
and, if necessary, maintained. The maintenance requirement depends on the intensity of use and
the environment in which it is used.
We generally recommend a visual inspection before each operation. Furthermore, we recommend
carrying out all the applicable maintenance measures specified below once every 500 operating
hours or, in the case of a lower intensity of use, at the latest after one year. Warranty claims may
be limited in the event of defects resulting from inadequate maintenance.
23