SEMC TF20 User Manual page 15

e. Select "Just Show Command"
f. Copy the command line
g. In new screen, type "ssh de20framealignment" or "ssh zeus"
h. Paste the command from step 25e
24. Start CTF correction (after first movie is done aligning)
a. CTF → estimate the CTF → CTFFIND v4
b. Default all settings except preset = en-a
c. Run on semc-head (or copy/paste into emgbox05)
25. If you are done for the day...refer to
End of Day Checklist
Last updated 10/29/2020
14