Page 3
Declaration of conformity The undersigned manufacturer: SAINT - GOBAIN ABRASIVES S.A. 190, BD. J. F. KENNEDY L-4930 BASCHARAGE Declares that this product : CV402 3104 36601 Dust extractor : Code : is in conformity with the following Directives : European Machinery Directive 2006/42/CE ...
BASIC SAFETY INSTRUCTIONS Before starting the dust extractor, it is absolutely essential to read these operating instructions and to keep them ready at hand for consultation. The extractor can only be used by people who are familiar with the way it works and who have been explicitly authorized and trained for the purpose. Before using it, the operator must be informed, instructed and trained on how to work it and for which substances its usage is permitted including the safe method for removing and disposing of the vacuumed material.
MACHINE DESCRIPTION Any modification, which could lead to a change in the original characteristics of the machine, may be done only by Saint-Gobain Abrasives who shall confirm that the machine is still in conformity with the safety regulations. Short description The dust extractor CV402 is a strong and performing machine with a powerful engine, ideal for dust and water suction effect.
ASSEMBLY AND COMMISSIONING The machine is delivered fully equipped and assembled and is ready for operation after connection to the appropriate power supply. Electrical connections Check that : The voltage supply corresponds to the information indicated on the machine. ...
MAINTENANCE AND SERVICING Disconnect the extractor from its power source before cleaning, servicing or replacing parts; the plug must be removed from the socket. The precautions described below must be taken during all the maintenance operation. Indication : - Carry out only the maintenance operations described in this manual. - Use only original spare parts.
Filter Side latches FAULTS : CAUSES AND CURES Fault-finding procedures Should any fault occur during the use of the machine, turn it off, and isolate it from the electrical supply. Any works dealing with the electrical system or supply of the machine can only be carried out by a qualified electrician.
Trouble-shooting guide Trouble Possible source Resolution Check for power at the socket Check the condition of the socket Lack of power supply and the cable The extractor does not start Ask for assistance to be performed qualified manufacturer's technician Clean the filter. Replace it if Clogged primary filter necessary The engine rpm increase...
Spare part The following is a list of spare parts that should be kept ready at hand in order to speed up maintenance operations. 00510109266 KIT MOTOR 310387496 PAPER DUST BAG (SET OF 5) 310387497 WASHABLE DUST BAG (SET OF 5) 00510109268 KIT DUST HOSE 00510109267...
Spare parts for the motor can be ordered with the manufacturer of the motor or with their dealer, which is often quicker and cheaper. This machine has been manufactured by Saint-Gobain Abrasives S.A. 190, Bd. J. F. Kennedy L- 4930 BASCHARAGE Grand-duché...
Page 14
Guarantee can be claimed and technical support obtained from your local distributor where machines, spare parts and consumables can be ordered as well: Benelux and France: United Kingdom From Saint-Gobain Abrasives S.A. Saint-Gobain Abrasives Ltd. Free telephone numbers: Doxey Road...
Page 16
Saint-Gobain Abrasives 190, Bd. J. F. Kennedy L-4930 BASCHARAGE LUXEMBOURG Tel: ++352 50401-1 Fax: ++352 501633 e-mail: sales.nlx@saint-gobain.com...
Need help?
Do you have a question about the NORTON CLIPPER CV402 and is the answer not in the manual?
Questions and answers