Asus RT-AXE7800 Quick Start Manual

Quick
Start Guide
RT-AXE7800
Wireless-AXE7800 Tri-band Gigabit Router
Router Setup Steps
01 Prepare your Modem
Unplug the power of cable / DSL modem. If it
1
has a battery backup, remove the battery.
Unplug
02 Install your Router
Plug the adapter into the DCIN port, and press the Power switch.
1
– Via app
[App] On your iOS or Android mobile device, go
3
to the app store, search for ASUS Router, and
download the app.
– Or via web browser
[Wired] Connect your PC to LAN port at the
3
back side of the router using an additional
network cable.
*
Please connect your PC to either LAN2, LAN3 or LAN 4
port.
1G Port WAN Type Setup Steps
01 Prepare your Router
Connect the modem to the WAN port (1G WAN/LAN1) with a
network cable.
Connect your modem to WAN port at the back side of the router with the
2
network cable provided. The WAN port is set as 2.5G by default.
Power on the modem. Plug modem to the power
3
outlet and power on.
Modem back
[App] On your iOS or Android mobile device, tap Settings > Wi-Fi, connect
4
to the default network SSID shown on the product label on the back side of
the router. Or scan the QR code on the product label to connect the default
network SSID.
[Wireless] Connect to the network with default
SSID shown on the product label on the back side
of your router "ASUS_XX".
02 Login and Connect
[ASUS Setup Wizard] Select "manual setting".
1
Hardware Explanations
I/O Ports Overview
1G WAN/LAN1 port
DCIN port
LAN ports 2-4
Specifications:
DC Power adapter
Operating Temperature
Operating Humidity
Modem back
The power LED will light up when the hardware is ready.
2
_
* XX refers to the last two digits
of MAC address. You can find it
on the label on the back of your
router.
[Wired / Wireless] Open a web browser.
4
You will be redirected to the ASUS Setup Wizard. If not, navigate to
http://router.asus.com.
Follow the instructions to
complete the setup.
– Setting to 1G WAN under factory default settings
LED Lights Overview
1G WAN/LAN1
2.5G WAN/LAN1
2.5G WAN/LAN1 port
USB 3.2 Gen 1 port
DC Output: +12V with 3.0A current
0~40 o C Storage 0~70 o C
50~90% Storage 20~90%
Check the modem LED lights to ensure the connection is active.
4
Modem front
[App] Launch ASUS Router App and follow the
5
instructions to complete the setup.
[ASUS Setup Wizard] Select "1G Ethernet", then follow the instructions to
2
complete the setup of SSID and login information.
POWER
5GHz
LAN
6GHz
2.4GHz
If you are using DSL for internet,
you will need your username
/ password from your Internet
service provider (ISP) to properly
configure your router.