Toshiba e-STUDIO6550C Series Manual page 32

3 SETTING OPTIONS
2) SNMP V1/V2
Community Name — If a community name other than "private" (default) is set for the SNMP community name for your
TOSHIBA MFP, enter its community name.
To send fax jobs normally under an SNMP V1/V2 environment, the SNMP community names must be the same
in the 3 settings shown below. For help, ask your administrator.
- Your TOSHIBA MFP
- [SNMP Settings] dialog box of the [Sender Information] tab
- TCP/IP port of the [Ports] tab in the N/W-Fax driver
To change the community name, the administrator privilege is necessary. You must log in with the
"Administrator" privilege and open the printer driver properties.
Up to 31 characters including the following symbols can be entered for the Community Name.
! " # $ % & ' ( ) * + , - / : ; < = > ? @ [ \ ] ^ _ ` { | } ~
3) SNMP V3
If SNMP V3 is enabled, select one of the following items to set how users are authenticated.
User ID File — Select this option when you want to use a user ID file. Click [Browse] and specify the user ID file.
User Name/Password — Select this option when you want to use the user name and password. When this option is
selected, keyboard or select the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
- Privacy Password
If you select to enable SNMP V3, consult your network administrator for preliminary advice on how to
authenticate users.
Up to 31 characters including the following symbols can be entered for each of the User Name, Authentication
Password and Privacy Password.
! $ % & ' ( ) - , < > @ [ ] ^ _ ` { } ~
4) [Restore Default]
Click this button when you want to reset all the settings back to the defaults.
30 Setting up the N/W-Fax Driver Options