Miboxer Mi Light K1 Instruction Manual

Rotatng switch panel remote

Features

It's made by 2.4GHz wireless control technology with low power consump�on, long distance,

strong ability for an�-interference and quick communica�on. Power supply is CR2032 ba�ery, the

rota�ng switch can dim brightness and color temperature, it's compa�ble for MiBoxer single color

and CCT LED light.

● Control distance 30m

● One remote supports unlimited LED light

● Magne�c installa�on method, more convenient

Rota�ng switch

Rota�ng Switch

Short press: turn on/oﬀ light

Rota�ng: dim brightness

Long press while the light is on: un�l indicator is blinking, switch to cct dimmable, rotate it to dim

color temperature.

(A�en�on: the device will log out cct mode if user don't operate it within 3 seconds)

Long press while the light is oﬀ: enter into night light mode.

Rota�ng Switch Panel Remote

Model No.: K1 / K1-B

Indicator

Subordinate New Brand

SET bu�on

CR2032

ba�ery box

Table of Contents

Do you have a question about the Mi Light K1 and is the answer not in the manual?

Page 1 It's made by 2.4GHz wireless control technology with low power consump�on, long distance, strong ability for an�-interference and quick communica�on. Power supply is CR2032 ba�ery, the rota�ng switch can dim brightness and color temperature, it's compa�ble for MiBoxer single color and CCT LED light.
Page 2 Linking Code / Unlinking Code Instruc�ons Remark: The light can be working a�er linking with the remote. Linking Code Instruc�ons Power Light Power Light SET bu�on Switch oﬀ light, a�er Short press " SET " Lights blink 3 �mes 10 seconds then bu�on 3 �mes within 3 slowly, means linking switch on again.
Page 3 Installa�on 1. Tear out the back tape. 2. S�ck the holder on the posi�on where you want. 3. Install CR2032 ba�ery. 4. Put the rota�ng switch on the front of holder. A�en�on 1. Children should use it under the inspec�on of Adult, avoid to eat bu�on cell. 2.

Mi light k1-b