NEXTIVITY Cel-Fi GO Manual

All manuals and user guides at all-guides.com
Cel-Fi GO
Quick Start Guide
Smart Signal Booster
Cel-Fi GO is an evolved cellular smart signal booster design
that can amplify cellular signals up to 70 dB. Connect a single
Donor Antenna to receive the macro-network signals, and then
a single indoor Service Antenna where you need service, and
Cel-Fi GO will do the rest automatically.
I

Install Donor Antenna

DONOR ANTENNA (Not Included)
Mount your Donor Antenna on the exterior of the vehicle, towards
the rear, according to its design, and the type of vehicle it's being
used with. Make sure you consider the cable connection to the
Cel-Fi GO unit with your location choice.
For best performance make sure there is 50cm of metal around
the base of the antenna.
2

Install Service Antenna

DONOR ANTENNA
Install Service Antenna in the cab, towards the front, where
coverage is needed. Ideally, there should be substantial material,
like the metal of the roof, between the Donor and Service
Antennas, to improve isolation.
MOBILE VERSION
™
SERVICE ANTENNA
(Not Included)