Adjust The Saddle - Qwic MIRA 2022 Manual

Before taking off for a drive, there are few things to be
done to get you up and running.

2.2. Adjust the saddle

Your saddle height can be adjusted by inserting an Allen key into point A.
Make sure you don't exceed the maximum saddle height. To find the correct
height, sit on the saddle and rest your foot on the pedal (in the lowest
position). In this position, your knee should be slightly bent. If you are able
to reach the ground with your foot flat on the floor, your saddle is too low.
The angle and horizontal position of your saddle can be adjusted by inserting
the Allen key into Point B. If something is unclear or you need assistance,
do not hesitate to ask your dealer for advice.
info
If you can rest your feet flat on the ground while sitting on your saddle,
you should raise it.
info
For torque values of the bolts, please check chapter 9.
bell
Do not forget to tighten the bolts and make sure that your seat is firmly
locked in place after making adjustments!
bell
Make sure your saddle is not higher than the maximum permissible.
2. FIRST STEPS
2.2. Adjust the saddle
A
B
Mira
9