Adjust The Handlebars; Adjust The Grips; Charging The Battery; Travel Charger - Qwic MIRA 2022 Manual

2.3. Adjust the handlebars

You can raise or lower the handlebar by slightly loosening bolt C. After
making adjustments, retighten the bolt. The handlebar can also be angled
according to your needs. Loosen the bolts indicated with D, re-position the
handlebar and retighten the bolts. Please note that a (very) large distance
between the saddle and the handlebar can result in neck-, back-, and
shoulder pain. We recommend that you consult your dealer for a proper
setup of all components on your e-bike.

2.4. Adjust the grips

To adjust the position of the grips to your liking, loosen the screws E on
both sides as indicated below with an Allen key. Adjust the grips simply by
rotating them.
bell
Do not forget to securely tighten the bolts after adjusting your
handlebar and grips.

2.5. Charging the battery

First remove the battery from the e-bike. Unlock it by turning the key in the
battery keyhole. The nylon strap can be used to easily lift the battery out of
the frame and carry it around.

2.6. Travel charger

With your bike you get a 4A charger as standard. You can charge the battery
in the e-bike and outside the e-bike.
In-bike charging
To start charging the battery while it is inserted in the e-bike, open the
rubber cap that seals the e-bike's charging port and connect the charger
plug. Connect the plug first before connecting the charger to mains.
Off-bike charging
To start charging off bike, insert the charging plug into the battery socket.
Connect the charging plug first before connecting to mains.
2. FIRST STEPS
2.5. Charging the battery
LED indicator
Travel
charger
Charging plug
Mira
11