Mitsubishi Electric FR-E5NP Instruction Manual page 38

Parameter
24V_Pins
Freeze_Mode_supp
Sync_Mode_supp
Auto_Baud_supp
Set_Slave_Add_supp
Min_Slave_Intervall
Modular_Station
Max_Module
Max_Input_Len
Max_output_Len
Max_Data_Len
Fail_Safe
Max_Diag_Data_Len
Slave_Family
PrmText
Text(0)
Text(1)
EndPrmText
ExtUserPrmData
Bit(0) 0 0-1
Prm_Text_Ref
EndExtUserPrmData
Max_User_Prm_Data_Len
Ext_User_Prm_Data_Const(0) 01
Ext_User_Prm_Data_Const(1) 00
Value
24V power supply for maintenance device connection is not
0
used.
1 Freeze mode supported.
1 Synchronous mode supported.
1 Automatic baud rate detection support
0 Slave address is not set.
1 100 µs interval between 2 polling cycles
1 Modular device specified.
1 Maximum number of modules: 1
28 Input data: Maximum 28 bytes
28 Output data: Maximum 28 bytes
56 Input and output data: Maximum 28 + 28 = 56 bytes
0 Failsafe non-support
6 Diagnostic data of 6 bytes secured (no external diagnosis)
1 Drives defined as function class (Main Family)
1 Text selection 1 registration
"No byte swapping" If Bit 0 = 0, "No byte swapping"
"Byte swapping" If Bit 0 = 1, "Byte swapping"
1 "Byte swapping" Byte swapping selection 1 registration on text base
Bit 0 = default 0, range 0 to 1
1 Text selection 1 is used.
2 User parameter of 2 bytes secured
Initial value of user parameter's 1 byte
H
Initial value of user parameter's 2 byte
H
31
Profibus Device Data
Description*1