Table of Contents
Advertisement
JX2-PROFI1
1.3
1.3.1
Danger
1.3.2
Danger
Jetter AG
Device Specific Prevention of Risks
Connecting Two PROFIBUS Participants
If two PROFIBUS participants being distant from each other are to be connected,
please make sure they have got the same potential.
The Use of Specific Connectors
Only connectors specified as PROFIBUS connectors may be used, as they
should already have been equipped with the terminating resistor, which can be
activated with the help of a special switch.
For baud rates that are greater than 1.5 MBaud, specific PROFIBUS connectors
for the reduction of cable capacitances must be applied.
Only use cables which have been specified as cable type A in the PROFIBUS
Standard EN 50 170.
The maximum cable lengths defined in the PROFIBUS Standard EN 50 170 must
be maintained.
1 Safety Instructions
12
Advertisement
Table of Contents
