Anton APM 145 Operating Instructions

APM 145
PRESSURE
METER
OPERATING
INSTRUCTIONS
Anton Industrial Services Limited
Unit 6 Greenhill House,
26 Greenhill Crescent,
Watford Business Park,
Watford WD18 8JA
Tel: 01923 274730
Email: sales@anton-group.com
www.anton-group.com
1. Positive pressure input spigot
2. Negative pressure input spigot
3. Backlit LCD screen
4. Multi-function 1 button
5. Multi-function 2 button
6. Multi-function 3 button
7. Power / Enter button
8. Escape / Cancel button
9. Infra-red LED
10. Magnet
11. Tilt stand / hook
INSTRUMENT APPLICATION
This instrument is not suitable for use with corrosive
substances or cyclic hydrocarbons, e.g. motor oil,
transmission fluid and Freon. To use the APM 145
with these components, isolation must be provided
in the form of a buffer, such as a mineral oil or dry
air.
INSTRUMENT OPERATION
ON / OFF
Press and hold button for 0.5s to turn on.
Press and hold button for 2s to turn off.
Default switch-off interval is 5 minutes, unless any
button is activated or the pressure level is above 1
mbar.
MENU STRUCTURE
Main Menu
Test Menu
Let-by / Tightness
Pressure
Diff Pressure
Working Pressure
Operating Pressure
Flue Draught Pressure
Units of Measurement
Settings
Auto off timeout
Back light
Key click
Report
Supervisor settings
Set date & time
Edit owner line 1
Edit owner line 2
Change Password
Stored Logs
Select a log
Find a log by number
Delete all logs
Test Menu – Let-by / Tightness
Used to carry out let-by, stabilisation and tightness
test.
Durations, pass & fail controlled by user.
Data can be stored & shared.
Test Menu – Pressure
Used for quick timed pressure tests that do not need
to be stored & shared.