La Crosse Technology WS-7136U Instruction Manual page 12

indoor temperature in the INDOOR
LCD and outdoor temperature in the
OUTDOOR LCD.
II.
PROGRAMMING SEQUENCE
The programming sequence and default
(factory) settings for the indoor temperature
station is as follows:
1. Time Format (default 12h)
2. Temperature Format (default °F)
3. Time-Hour (default 12)
4. Time-Minute (default 00)
Programming Note: The instructions are
arrange so that you can program each feature
independently. If you would like to program
the indoor temperature station completely at
one time please disregard the first three steps
of sections IV and V. When you get to the
last steps in sections III and IV, proceed to
step 4 in the next section without waiting 15
seconds for the display to return to the
normal mode.
12