Advertisement
Page 2 :
PC Manager Tool Quick Start
Run manager tool. Select correct Com port and
input default password "1234". Then press OK.
Set "Report Mode" to "TCP Short Connection". input
the IP
address and port number of the backend
server. Please make sure the IP address can be
accessed by internet and the data sends to this
address can be received.
Press the "Send" button and update the
parameters of GT200. Then the GT200 can
report information to your backend server or
SMS receiver.
Note: This command can also be sent to
GT200 by SMS.
Command has been accepted when you see the success
window.
The following screen shot shows how to create a
Geo-Fence rule. Press "Send" button to update the
parameters.
If you want to test the GT200 by SMS then set "Report
Mode" to "Force on SMS" and input the phone
number which you want to receive the SMS from
GT200. After that you can go to
Otherwise please go to
Step 3
Please contact your SIM card provider and get the
APN information for GPRS. Input it to the "GPRS
Setting"
Set the parameters of scheduled fixed timing
report so that the GT200 will report it's position
to backend server periodically. Press "Send"
button to update the parameters.
Follow screen shot shows how to configure the
GT200 to report it's position every 2 minutes.
After these steps. GT200 will have some
basic tracking functions like scheduled
timing report and Geo-Fence. For other
advanced functions of GT200 please
refer to "GT200 @Track Air Interface
Protocol" or visit our website.
Quectel Wireless Solutions
Website : www.quectel.com
Email : info@quectel.com
Step 6.
Advertisement
