Advertisement
Operation
User Modes:
Mode Name /Description
Change Celsius (
0
C) to Fahrenheit (
Disable/Enable Heat Options
Resetting the Temperature Cutout Switch
Should the heater overheat, an automatic cutout will turn the heater off. It will not come back on without being
reset. To reset the cutout swtich, unplug the unit and wait 5 minutes before plugging it back in.
Action (Actions cannot be input by remote control)
0
F)
Press both Temp down (
the unit and hold until beep is heard and display
flashes. (To revert back to Celsius repeat this action)
Hold both Flame cycle (
on the product, for 5 seconds, when the heater has
been disabled the product will beep. This will disable
heat control functions on the product only. To enable
heat repeat this action. Note: the remote control will
still be able to operate heat functions.
) and Temp up ( ) on
) and Heat cycle ( ),
11
Advertisement
