Download Print this page

Daily Alarm Mode; Chronograph Mode - Lacrosse UV Master UV-100 Instruction Manual

Lacrosse uv-100 digital atomic watch: instruction manual

Advertisement

5.10 UV Index Mode
- Calibrating the UV Index
To Calibrate the UV Index
! When the settings of the previous '5.7 Setting the
Upper and Lower UV Index Alarms' Section
are finished, press the [mode] button once to
scroll the
scroll
setting by
the setting
calibrate the UV Index.
increment of 1
faster
! When the 'CAL' indicator appears, press the
hold
[start/stop]
[start/stop]
UV Index Mode
[start/stop] or [lap/reset] button to select the pre-
(Current UV Index Display)
determined CAL between 0 to 50 by scrolling of 1
[mode]
hold
hold
(hold down the button to scroll the setting faster).
[mode]
[mode]
'LO' Lower
'HI' Upper
Check the previous '5.9 To Determine the
UV Index
UV Index
Alarm
Alarm
Calibration Factor (CAL)' for more detail on how
to determine the CAL.
[mode]
! When the above settings finished, press and hold
the [mode] button for about 2 seconds to exit the
[mode]
'CAL'
setting sequence.
Calibration
! The setting display will change to UV Index Mode
UV Index Mode
automatically if no key-stoke has been activated
Setting Sequence
for about 3 minutes.
hold
[lap/reset]
[lap/reset]
scroll the
scroll
the setting
setting by
decrement of 1
faster
17

6.0 Daily Alarm Mode -

Daily Alarm Mode
! This Watch includes a daily alarm for user's
Current Time
convenience. The daily alarm can be set by the
user.
! Check the coming '6.1 Setting the Daily Alarm
Mode' Section for more detail on how to set the
Daily Alarm Mode.
Alarm
Mode
Time
Indicator
The Daily Alarm Display
Daily Alarm Mode
(Alarm OFF & Chime OFF)
! The Current Time (hours, minutes) shows on the
upper row of the display.
[start/stop]
! The Alarm Time (hours, minutes) shows on the
lower row of the display.
To Select between ON and OFF the Daily Alarm
! Press the [start/stop] button once to set between
ON and OFF the Daily Alarm. When the Daily
Daily Alarm
Indicator
Alarm Indicator '
ON (the watch starts beeping at the alarm time for
Daily Alarm Mode
about 30 seconds).
(Alarm ON)
To Select between ON and OFF for the
Hourly Chime
! Press the [lap/reset] button once to select
[lap/reset]
between ON and OFF the hourly chime. When
the Hourly Chime Indicator '
Hourly Chime
hourly chime is ON (the Watch will beep once on
Indicator
the hour).
Daily Alarm Mode
(Chime ON)
18
' appears, the daily alarm is
' appears, the
6.1 Daily Alarm Mode -
Setting the Daily Alarm Mode
! To set the Daily Alarm Time, press and hold the
[mode] button to select the setting display.
! When the 'minute' digits flash on the display,
press the [start/stop] or [lap/reset] button to set
scroll
scroll the
setting by
the setting
the minute by scrolling of 1 (hold down the button
faster
increment of 1
to scroll the setting faster).
hold
[start/stop]
[start/stop]
! When the 'hour' digits flash on the display, press
Daily Alarm Mode
the [start/stop] or [lap/reset] button to set the hour
hold
hold
[mode]
[mode]
[mode]
by scrolling of 1 (hold down the button to scroll
Minute
Hour
the setting faster).
! When the setting is finished, press and hold
[mode]
the [mode] button to exit the setting sequence.
Daily Alarm Mode
! The setting display will change to Daily Alarm
Setting Sequence
Mode automatically if no key-stoke has been
hold
activated for about 3 minutes.
[lap/reset]
[lap/reset]
Daily Alarm Sound
scroll
scroll the
setting by
the setting
! When the daily alarm is ON, the watch starts
faster
decrement of 1
beeping at the alarm time for about 30 seconds.
! When the beeps sounds, it can be stopped
prematurely by pressing one of the buttons,
except the [light] button.
19

7.0 Chronograph Mode -

Chronograph Mode
This Watch includes a Chronograph Mode, it can
!
Mode Indicator
measure 3 different types period of time:
Chronograph Time
1) Elapsed time,
(1/100 Second)
Chronograph
2) Accumulative elapsed time, and
Time (hour)
3) Lap time (1 lap only)
Chronograph Display
Chronograph
Chronograph
Chronograph Mode
Time (minute)
Time (second)
(Zero Display)
! The display shows the 'Zero' display, if the Watch
or the chronograph has been reset.
! The Chronograph Mode Indicator exhibits on the
0
30
upper row of the display.
1. Elapsed time
[start/stop]
[start/stop]
! The chronograph time (hours, minutes, seconds
and 1/100 second) exhibits on the lower row of
0
10
10
20
the display.
2. Accumulative
! T h e m a x i m u m c o u n t i n g r a n g e o f t h e
elapsed time
[start/stop]
[start/stop]
chronograph is 9 hours, 59 minutes and 59.99
[start/stop]
[start/stop]
seconds.
0
10
20
3. Lap time
(1 lap only)
[start/stop]
[lap/reset]
[lap/reset]
0
10
20
30
40
time
Elapsed Time, Accumulative Elapsed Time and Lap Time
: Stop Counting
: Counting
20

Advertisement

loading