Lacrosse UV Master UV-100 Instruction Manual

U V M a s t e r
Prevent You Getting UV Over-Exposure
1
1.0 Introduction
! It is recommended to have the battery
Thank you for purchasing this model. Your
replacement done by a certified service
Watch includes 5 functional modes. They are
agency as this practice will
the Current Time Mode, UV Index Mode, Daily
maintain the water resistance standard
Alarm Mode, Chronograph Mode and Timer
on your Watch.
Mode.
! Clean your Watch occasionally with a soft
This Watch equipped with an UV sensor that
moistened cloth. DO NOT expose the
measures UV radiation in terms of UV index.
Watch to strong chemicals such as
This model also includes 2 UV index alarms.
gasoline and alcohol, as they will damage
In addition to the UV sensing, this model also your Watch.
i n c l u d e d c u r r e n t t i m e , d a i l y a l a r m ,
chronograph and timer functions.
! DO NOT use this Watch for commercial or
Your Watch is carefully designed and
professional purpose.
produced, in order to utilize this feature of
! Make sure that you fully understand the
your Watch, it is advisable to use the Watch in
functions and limitations of this Watch
conformity with the below notes:
before using it.
! Read this manual before using the Watch.
! Always compare the UV reading with the
! Avoid exposing your Watch to extreme
one broadcasted by local weather station.
conditions for an unreasonable time.
! Excessive exposure to UV radiation could
! Avoid rough use or severe impacts to your cause fatal harm to a human body, always
Watch.
follow the 'Basic Sun Protection
M e s s a g e s ' b y t h e W o r l d H e a l t h
! Store your Watch in a dry place when it is
Organization when you go out in the Sun.
not in use.
2
Instruction Manual
WARNING
2.0 Parts and Its Functions
[mode] Button
Press the button to select among the 5 function
UV Index l
Color Code
modes In function modes: Press and hold the button
l
to select setting display
the button to select among different setting items. Press
Light Start/Stop
and hold the button to exit setting sequence.
[start/stop] Button
In Current Time Mode: Press the button to select
l
between the Date Display and UV Index Display
Lap/Reset
Mode
Daily Alarm Mode: Press the button to select between
ON and OFF the daily alarm
and Timer Mode: Press the button to start/stop the
Display
counting In setting displays: Press the button to scroll
l
UV Sensor
through the setting.
[lap/reset] Button
In Daily Alarm Mode: Press the button to select
l
between ON and OFF of the hourly chime In
Chronograph Mode: When counting, press the button to
select the Lap time display. When stop-counting, pres s
the button to reset to zero display
When stop-counting, press the button to reset the timer
to target time
Note: The operations of the buttons
button to scroll the setting.
are summarized in the adjacent
[light] Button
paragraphs. However, for the detail
operations, please check the coming In any mode, press the button once to turn ON the EL
l
chapters.
back light for about 3 seconds.
3.0 Functional Mode and Functional Display
! The Watch includes 5 functional modes. They
are the Normal Time Mode, UV Index Mode, Daily
Alarm Mode, Chronograph Mode and Timer Mode.
[mode]
button
! Every function mode may include one or more
than one function display, it provides
supplementary features to the corresponding
function mode.
Current Time Mode Timer Mode
To Switch among the 5 Functional Modes
[mode] [mode]
button button
! To select among the
the [mode] button
To Switch among the Function Displays
! To select among the function displays, check the
coming chapters for the detail on how to switch
among different function displays.
UV Index Mode Chronograph Mode
[mode] [mode]
button button
Daily Alarm Mode
Function Mode Selection Sequence Function Mode and Function Display
During setting displays: Press
l
In
l
In Chronograph Mode
l
In Timer Mode:
l
In setting displays: Press the
l
3
5 function modes, p ress
following the adjacent figure.
Function Function Function
Display Display Display
Function Mode
4