1. Manuals
  2. Brands
  3. LST Manuals
  4. Fire Alarms
  5. FI750/RF/PA
  6. Instructions

LST FI750/RF/PA Instructions

Wireless remote indicator
Hide thumbs
1
2
3
4
Table of Contents

Advertisement

Quick Links

Download this manual

GENERAL DESCRIPTION

The FI750/RF/PA remote indicator is an output device which, activated by the control panel, switches on its red light in the event of an emer-
gency fire alarm. It is battery powered and doesn't need any system cabling installation.
The activation command is sent from the control panel to the indicator through the wire to wireless translator interface modu le and other
possible wireless expander modules. It is intended to be used within the compatible range of products.
Picture 1

DEPLOYMENT PROCEDURE

1) Select a location for the remote indicator. See LOCATION SELECTION.
2) Unbox the remote indicator from its packaging.
3) Power up the remote indicator. See POWERING UP - FIRST TIME USE / POWERING UP - RECOVERY.
4) Link the remote indicator to the system. See LINKING - WAKE-UP / LINKING - ONE-BY-ONE.
5) Install the back cover. See FIXING THE BACK COVER.
6) Install the device onto the back cover. See HOW TO REMOVE AND REINSTALL THE FRONT COVER.
7) Test the remote indicator. See TESTING.

LOCATION SELECTION

Select a location for the remote indicator that conforms to your local applicable safety standards and that is in a good posi tion for sending /
receiving wireless signals to / from the father FI750/RF/W2W, FI750/RF/CWE or FI750/RF/WE network device.
Mount the remote indicator as far as possible from metal objects, metal doors, metal window openings, etc. as well as cable conductors,
cables (especially from computers), otherwise the operating distance may greatly drop.
The FI750/RF/PA must NOT be installed near electronic devices and computer equipment that can interfere with its wireless communication
quality.
Labor Strauss Sicherungsanlagenbau Gmbh - Wiegelestrasse 36 A-1230 Wien Austria
FI750/RF/PA
Wireless Remote indicator
Link program
switch
It is advisable to use the FI750/RF/MK survey kit
to locate a good wireless installation location.
Tamper
switch
Battery B
housing
Battery A
housing
www.laborstrauss.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the FI750/RF/PA and is the answer not in the manual?

Questions and answers

Related Manuals for LST FI750/RF/PA

Summary of Contents for LST FI750/RF/PA

  • Page 1 GENERAL DESCRIPTION The FI750/RF/PA remote indicator is an output device which, activated by the control panel, switches on its red light in the event of an emer- gency fire alarm. It is battery powered and doesn’t need any system cabling installation.
  • Page 2 Wake-up is performed either through the TauREX software or the FI750/RF/W2W / FI750/RF/CWE keyboard-screen interface; it CANNOT be done through FI750/RF/WE devices. 1) Create the “virtual model” (be aware that the Output Module type has to be selected to link a remote indicator) of the FI750/RF/PA either on TauREX or on the FI750/RF/W2W / FI750/RF/CWE.
  • Page 3 LINKING - ONE-BY-ONE “One-by-one” linking consists in associating one child device at a time to the compatible system. This operation is performed either through the TauREX software or the FI750/RF/W2W / FI750/RF/CWE keyboard-screen interface; it CAN- NOT be done through FI750/RF/WE devices. 1) Create the “virtual model”...
  • Page 4 Appropriate risk assessment should be carried out initially to determine correct design criteria and updated periodi- Austria cally. Use only with compatible fire detection and alarm systems. FI750/RF/PA WARRANTY All devices are supplied with the benefit of a limited 2 years warranty relating to faulty materials or manufacturing Designed for defects, effective from the production date indicated on each product.

Table of Contents