Advertisement
6. Wheel lock assembly
These are used to hold the transit chair in a stationary position, and are fitted on either side
of the transit chair. They should not be used when the transit chair is moving or to slow it
down. They should always be applied together.
To operate, push the brake lever forward towards the front of the transit chair. This will
immobilize the transit chair. To release the brake, move the lever towards the rear of the
transit chair.
7. Cross Bar
Operation of the cross brace permits the transit chair to be opened and closed easily. It
should be inspected at regular intervals for signs of wear and bending.
8. Folding Backrest Device
Push down the hinge to fold down the backrest. Automatically lock when pull up the
backrest handle. This device is to enhance the storage feature.
9. Quick Release Wheels
To aid transportation, the rear wheels can be removed by pushing the middle section of the
wheel and pulling to release. To refit, reverse the procedure. Always make sure the wheels
are fully connected before use.
10. Tyre pressure and inflation
For transit chairs that are fitted with pneumatic tyres they should be inflated with a manual
operated pump. Under no circumstances should a powered or compressed air pump be
used. The tyre pressure should be tailored for optimum user comfort and ease of transit
chair use. We recommend a tyre pressure of 35psi (241KpA) for comfort. However, do not
exceed the maximum tyre pressure stated on the side wall of the tyre. This may differ
slightly between tyres, but is typically:
• 65 psi (487 KpA) for24" self-propel wheels
• 40 psi (275 KpA) for 12½" wtransit wheels
9
Advertisement
