Advertisement
ASSEMBLY
1.
First remove all contents from the box.
2.
To open the transit chair, push seat rails and press downwards until the
chair is fully opened taking care to keep fingers clear of moving parts
(Fig.1).
Note:
The seat rails must be fully engaged in the seat frame support brackets
before sitting down.
3.
To close the transit chair, take the centre of the seat fabric at the front and
back edges and lift (Fig. 2).
(Fig.1).
Note: When opening and closing your transit chair please keep fingers well away from any
possible entrapment areas.
The only part of the transit chair that can be adjusted are the foot rests. Ideally your knees
should be at 90 degrees with the seat. If you are not sure please contact a healthcare
professional or your local transit chair dealer for advice.
(Fig.2).
4
Advertisement
