Metering Mode - Sony ILME-FX30 Help Manual

Help Guide
Interchangeable Lens Digital Camera
ILME-FX30
Exposure Std. Adjust (still image/movie)
Adjusts this camera's standard for the correct exposure value for each metering mode.
MENU → (Exposure/Color) → [Exposure Comp.] → [
1
mode.
Select the desired value as the metering standard.
2
You can set a value from -1 EV to +1 EV in 1/6 EV increments.

Metering Mode

The set standard value will be applied when you select the corresponding metering mode in MENU →
(Exposure/Color) → [Metering] → [
Multi/ Center/
Note
The exposure compensation will not be affected when [
The exposure value will be locked according to the value set for [
The standard value for M.M (Metered Manual) will be changed according to the value set in [
The value set in [ Exposure Std. Adjust] is recorded in Exif data separately from the exposure compensation value. The
amount of exposure standard value will not be added to the exposure compensation value.
If you set [ Exposure Std. Adjust] during bracketing shooting, the number of shots for the bracketing will be reset.
Related Topic
Metering Mode (still image/movie)
Metering Mode].
Spot/ Entire Screen Average/
5-043-036-11(1) Copyright 2022 Sony Corporation
Exposure Std. Adjust] → desired metering
Highlight
Exposure Std. Adjust] is changed.
Spot] during using spot AEL.
179
Exposure Std. Adjust].