RD WORKS FP406R-Q Owner's Manual page 7

shining), it is ready to operate:
1、Start and select working mode
Or POWER
Or
2、Setting room temperature
Or
Or
Turn the heater on by pressing the ON/OFF button on the
control panel or by pressing the Power button on the
supplied remote control.
Once power is off, heating element will stop working at
first. Fan will prolong working for 3min to emit plenty of
heat inside. Then shut OFF automatically.
Select a heat setting.
Press the HEATER button to toggle between the two heat
settings.
Power for heat-up mode is 1500W; heat-down is 1000W,
and turn off the heat.
Adjust the thermostat by pressing the arrows on the control
panel or remote control.
Set temperature indication varies from 59℉ to 95℉，or
from 15℃ to 35℃. Once you have chosen the desired
temperature, the heater will remain on until the room
temperature increases to the temperature on the digital
display. The heater will cycle on and off to maintain the
desired room temperature.
Press ℃/℉ button, then digital display will indicate
Fahrenheit value or Celsius value.
When Fahrenheit indicating light's on, digital display
indicates Fahrenheit value,
When Celsius indicating light's on, digital display
indicates Celsius value.
7