HyperX Cloud MIX Buds -True Wireless Earbuds Quick Start Guide

Overview

1. Charging contacts
2. Touch sensor
3. Microphones
4. Charging case
5. Charging case status LED
6. USB-C port
7. Charging case button
8. Low latency USB adapter
9. USB adapter status LED
10. USB adapter button
11. Extension adapter
12. Silicone case
13. Ear tips (large, small)
14. USB-C to USB-A cable

Powering on and off the Earbuds

To power on the earbuds, open the charging case. The charging case status LED will show the battery level of the earbuds.

To power off the earbuds, return them to the charging case and close the lid. The case LED will turn off.

Pairing the Earbuds

1. With the earbuds inserted, open the lid of the charging case.
2. Press and hold the charging case button for 3 seconds. The charging case status LED will begin flashing blue.
3. On your Bluetooth® enabled device, search for and connect to HyperX Cloud MIX Buds. Once connected, the charging case status LED will turn solid blue and fade off, returning to the battery level indication.

Connecting the Low Latency USB Adapter

1. Connect the low latency USB adapter to your mobile device, PC, or video game console. The USB adapter status LED will begin flashing white. When not being used with a mobile device, it is recommended that the included extension adapter and USB-C to USB-A cables be used.
2. When the earbuds are powered on, they will automatically connect to the dongle, and the dongle status LED will breathe white.

Cloud MIX Buds will prioritize connecting to the USB adapter and will automatically switch from Bluetooth® if the low latency connection becomes available. To manually switch connections between the low latency adapter and Bluetooth®, long-press the USB adapter button.

Using the Touch Controls

The following media controls are available when using Bluetooth® or the low latency USB adapter:

The following phone controls are available when using Bluetooth®:

NOTE:
Touch control functionality can vary between devices and apps

Muting the Microphones When Using the Low Latency USB Adapter

Press the USB adapter button to mute/unmute the low latency USB adapter's microphone audio. The USB adapter status LED will breathe red when the microphone audio is muted.

Checking the Charging Case Battery Level

Press the charging case button to check the charging case's battery level, indicated by a blink and hold of the case's status LED.

Charging

It is recommended that the charging case and earbuds be fully charged before first use.

When charging, the charging case status LED will indicate the battery level of the earbuds.

If neither earbud is in the charging case, the case status LED will indicate the battery level of the charging case.

Bluetooth A2DP mode: Up to 33 hours/Ultra-low latency mode: Up to 21 hours

*Tested at 50% headphone volume, continuous playback. Using A2DP mode earbuds have up to 10 hours of battery life and up to an additional 23 hours using the charging case. Using ultra-low latency mode earbuds have up to 6 hours of battery life and up to an additional 15 hours using the charging case. Actual battery life will vary with use and maximum capacity will naturally decrease with time and usage.

HyperX NGENUITY Mobile

To customize sound, controls, and other settings, please download the HyperX NGENUITY Mobile application from iOS App Store or Android Google Play.

Questions or Setup Issues?

Contact the HyperX support team or see the user manual at:hyperxgaming.com/support/headsets

Permanent hearing damage can occur if a headset is used at high volumes for extended periods of time.

Videos

Cloud Mix Buds - Step-by-Step Guide Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download HyperX Cloud MIX Buds -True Wireless Earbuds Quick Start Guide