Advertisement
Fin Installation Instructions
Slide the fin into the groove at the back of the board, then insert
the fixed pin to secure it. Please refer to below images.
Paddle Installation Instructions
The
board paddle comes in three pieces. To build the paddle, hold
the button in while sliding the pieces together until they click into
place. The top section of the paddle is adjustable. Close the button
after adjusted the
length to your desired position. Please refer to below images.
Note:
1). After closing the button, if the adjustable section is a little
loose, tighten the screw properly with a screwdriver.
2). The length of the paddle can be adjusted from 170cm to 210cm.
-5 -
Advertisement
